Body-Electrical (Five Items)
Product Name: Universal Linear Actuators
Product Description: This product includes two, 8 inch linear or straight line actuators (8 inches of travel). They are both electrically controlled by either a push button on the center console, or a remote push button attached to the key chain. There is a push button for opening and another push button for closing the trunk lid. During installation, identifying the exact location of the upper and lower mounts will determine the amount of opening. For example, if the upper mounts were moved to the right, or further from the hinges' pivot point, the trunk lid would not open as far. If the upper mounts were moved to the left or closer to the hinges, the trunk lid would open more, but require more force. For best results, position the upper and lower mounts so that the linear actuators are as close as possible to being perpendicular to the trunk lid during most of the trunk lid opening. For more information on the remote transmitter used to energize the actuators, see the information below on the Linear Actuator Controller.
Product Description: This product includes two, 8 inch linear or straight line actuators (8 inches of travel). They are both electrically controlled by either a push button on the center console, or a remote push button attached to the key chain. There is a push button for opening and another push button for closing the trunk lid. During installation, identifying the exact location of the upper and lower mounts will determine the amount of opening. For example, if the upper mounts were moved to the right, or further from the hinges' pivot point, the trunk lid would not open as far. If the upper mounts were moved to the left or closer to the hinges, the trunk lid would open more, but require more force. For best results, position the upper and lower mounts so that the linear actuators are as close as possible to being perpendicular to the trunk lid during most of the trunk lid opening. For more information on the remote transmitter used to energize the actuators, see the information below on the Linear Actuator Controller.
Product Name: Linear Actuator Controller
Product Description: This product, shown in the photo to the left, (see arrow) is a seven channel Linear Actuator Controller. Seven channels means that it can control seven different electrical circuits. For this vehicle, the following channels and transmitter buttons are used:
Channel 1--Open left door. (button 1)
Channel 2--Open right door. (button 2)
Channel 3--Open trunk (button 3)
Channel 4--Close trunk (button 4)
Channel 5--Lock both doors (buttons 1 and 2)
Channel 6--Unlock both doors (buttons 1 and 3)
Channel 7--Not used.
Product Description: This product, shown in the photo to the left, (see arrow) is a seven channel Linear Actuator Controller. Seven channels means that it can control seven different electrical circuits. For this vehicle, the following channels and transmitter buttons are used:
Channel 1--Open left door. (button 1)
Channel 2--Open right door. (button 2)
Channel 3--Open trunk (button 3)
Channel 4--Close trunk (button 4)
Channel 5--Lock both doors (buttons 1 and 2)
Channel 6--Unlock both doors (buttons 1 and 3)
Channel 7--Not used.
Product Name: Fuse panel and wiring kit
Product Description: This kit includes a complete wiring system, fuses, relays, color coded and labeled wires, and connectors for the street rod. The fuse panel includes all circuits necessary for an operational and safety inspected street rod, (Highway 22 Series). When selecting the location of the fuse panel, keep in mind wire length and ease of replacing fuses. One location often used is directly behind the front seats. Panels can be designed to be easily removed. Also, wiring can be routed to the front as well as the back of the vehicle with ease. For ease of wiring, it is also important to locate the fuse panel close to the battery.
Product Description: This kit includes a complete wiring system, fuses, relays, color coded and labeled wires, and connectors for the street rod. The fuse panel includes all circuits necessary for an operational and safety inspected street rod, (Highway 22 Series). When selecting the location of the fuse panel, keep in mind wire length and ease of replacing fuses. One location often used is directly behind the front seats. Panels can be designed to be easily removed. Also, wiring can be routed to the front as well as the back of the vehicle with ease. For ease of wiring, it is also important to locate the fuse panel close to the battery.
Product Name: Ford Headlamp Bucket Assembly
Product Description: This product is a 1937 Ford headlight assembly. It has the bucket, glass lens, blinker light, (see arrow) wiring, and chrome headlight ring. There are three wiring circuits in this light including the blinker, the high beam, and the low beam. After the bucket has been installed on the front fender, the lens and chrome ring can be installed. Gaskets are used to keep the water out of the assembly. It is also important that the bucket doesn't hit the front wheels when make sharp turns.
Product Description: This product is a 1937 Ford headlight assembly. It has the bucket, glass lens, blinker light, (see arrow) wiring, and chrome headlight ring. There are three wiring circuits in this light including the blinker, the high beam, and the low beam. After the bucket has been installed on the front fender, the lens and chrome ring can be installed. Gaskets are used to keep the water out of the assembly. It is also important that the bucket doesn't hit the front wheels when make sharp turns.
Product Name: Ford tail light
Product Description: This product is called 1939 Ford, teardrop style, blue dot tail lights. The kit includes the lens, the chrome ring, the frame, seals, and wiring. Each light has one bulb with two filiments. One filiment is for brake lights, and one is for running lights. Two lights were placed on each side to have more circuit options including left or right blinker lights, brake lights, running lights, and flasher lights. The center light below the license plate (see arrow) is an LED
light and goes on only in reverse.
Back to Product Guide
Product Description: This product is called 1939 Ford, teardrop style, blue dot tail lights. The kit includes the lens, the chrome ring, the frame, seals, and wiring. Each light has one bulb with two filiments. One filiment is for brake lights, and one is for running lights. Two lights were placed on each side to have more circuit options including left or right blinker lights, brake lights, running lights, and flasher lights. The center light below the license plate (see arrow) is an LED
light and goes on only in reverse.
Back to Product Guide